Sort by

Austrian Audio OC16 Studio Set - Cardioid Pattern Precision Microphone

0 Reviews
43,375.00
Directional characteristics: Single Impedance: 275 Ω Polar pattern: Cardioid Load impedance: > 1 kΩ Frequency range: 20 Hz - 20 kHz Supply voltage: 48 V (< 2.2mA) Sensitivity: 11 mV/Pa Main Connector: XLR 3 pin Equivalent noise level: 14 dB SPL (A) Max SPL: 148 dB SPL Dimensions: 157 x 66 x 34 mm Weight: 335 g Analog Low Cut filter:   40 Hz, 160 Hz

Austrian Audio OC707 - True Condenser Vocal Microphone

0 Reviews
47,115.00
Directional characteristic: Cardioid Frequency range: 35 Hz – 20 kHz Sensitivity: 10 mV/Pa Equivalent noise level: 19 dB SPL (A) Max SPL: 150 dB SPL Low cut filter: 120 Hz (2nd order) Impedance: 275 Ω (symmetrical) Load impedance: > 1 kΩ Supply voltage: 48 V (< 2.5 mA) Main Connector: XLR 3 pin Dimensions: 194 x 53 x 53 mm Weight: 350g
Categories:

Austrian Audio OC707 WL1 Cardioid True-Condenser Wireless Microphone Capsule

0 Reviews
49,595.00
Compatibility: Shure, Sony, Lectrosonics Microphone Type: Condenser Capsule Polar Pattern: Cardioid Max SPL: 152dB SPL Frequency Range: 35Hz-20kHz

Austrian Audio OD303 - Dynamic Vocal Microphone

0 Reviews
11,689.00
Directional characteristic: : Supercardioid Frequency range: : 35 Hz – 16 kHz Sensitivity:: 1.8 mV/Pa Pop Noise Protection: : 3D Pop Noise Diffuser Impedance:: 1200 Ω (symmetrical) Load impedance:: > 1 kΩ Main Connector: : XLR 3 pin Dimensions:: 194 x 53 x 53 mm Weight:: 330 g

Austrian Audio OD505 - Active Dynamic Vocal Microphone

0 Reviews
29,402.00
Directional characteristic: Supercardioid Frequency range: 35 Hz – 16 kHz Sensitivity: 4.4 mV/Pa Max. SPL: 154 dB SPL Low cut filter: 120 Hz (2nd order) Impedance: 275 Ω (symmetrical) Load impedance: > 1 kΩ Supply voltage: 48 V (< 1 mA) Main Connector: XLR 3 pin Dimensions:194 x 53 x 53 mm Weight: 340 g

Austrian Audio OD505 WL1 Wireless Active dynamic Microphone Capsule

0 Reviews
30,950.00
Microphone Type: Dynamic Capsule Compatibility: Shure, Sony, Lectrosonics Polar Pattern: Supercardioid Max SPL: 150dB SPL Frequency Range: 35Hz-16kHz

Lauten Audio Clarion FC-357

0 Reviews
138,324.00
SPECIFICATIONS & DIAGRAMS TYPE PRESSURE GRADIENT FET CONDENSER CAPSULE 35MM DUAL DIAPHRAGM POLAR PATTERNS CARDIOD / OMNIDIRECTIONAL / FIGURE-8 FREQ. RESPONSE 25HZ - 20KHZ DYNAMIC RANGE 120DB MINIMUM MAX. SPL 0.5% THD @1000HZ: 130DB IMPEDANCE <200 OHMS SELF-NOISE LEVEL < 12DB(A) SENSITIVITY 16MV/PA OR -36±2DB ODB=1V/PA 1KHZ CONNECTOR 3-PIN XLRP FINISH CERAKOTE (CERAMIC)
POWER
REQUIRES 48V PHANTOM POWER

Lauten Audio Eden LT-386

0 Reviews
418,621.00
Lauten Audio Eden LT-386 Technical Specifications:
  • Type: 31.25mm dual large diaphragm pressure gradient transducer microphone.
  • Polar Patterns: Omnidirectional, Cardioid and Figure-8 selectable.
  • Circuit: Vacuum tube, transformer balanced
  • Frequency Range: 20Hz-20KHz
  • Dynamic Range: 120dB minimum
  • Impedance: < 200 ohms
  • Max. SPL: 0.5%THD@1000Hz: 120dB
  • Self-noise Level: < 20dB(A)
  • Sensitivity: 16mV/Pa OR -36±2dB 0dB=1V/Pa 1000Hz Special Features:
  • Kick-shaper & Vocal-shaper, High-pass filters
  • 3-stage Multi-voicing™ switch
  • Polar pattern switch
  • Connector: 5-pin XLR (PSU to microphone) and 3-pin XLR (PSU to Preamp)
  • Power Requirement: Custom power supply (100v to 240v compatible)

Lauten Audio LA-120 V2 Black Pair

0 Reviews
53,590.00
TYPE TRANSFORMERLESS CONDENSER CAPSULE 17MM PRESSURE GRADIENT POLAR PATTERNS CARDIOID & OMNIDIRECTIONAL FREQ. RESPONSE 20HZ - 20KHZ HIGH PASS FLAT / 50Hz / 120 Hz LOW PASS FLAT / 15kHz / 10 kHz DYNAMIC RANGE 120DB MINIMUM MAX. SPL 0.5% THD@1000HZ: 130DB IMPEDANCE <200 OHMS SELF-NOISE LEVEL < 15DB-A SENSITIVITY 10MV/PA -40DB (0DB=1V/PA 1KHZ) CONNECTOR 3-PIN XLR POWER REQUIRES 48V PHANTOM POWER BOX DIMENSIONS 4" x 10" x 10" IN-BOX WEIGHT 2.7lbs MIC W/ MOUNT WEIGHT (EACH) 6oz

Lauten Audio LA-220 V2

0 Reviews
37,481.00
TYPE TRANSFORMER-BALANCED FET CONDENSER CAPSULE 32MM CENTER-TERMINATED PRESSURE GRADIENT POLAR PATTERNS CARDIOID FREQ. RESPONSE 20HZ - 20kHz HIGH PASS FLAT / 120Hz LOW PASS FLAT / 12kHz DYNAMIC RANGE 120DB MINIMUM MAX. SPL 0.5% THD @1000HZ: 130DB IMPEDANCE <200 OHMS SELF-NOISE LEVEL < 15DB-A SENSITIVITY 16MV/PA -40DB (ODB=1V/PA 1KHZ) CONNECTOR 3-PIN XLR POWER REQUIRES 48V PHANTOM POWER BOX DIMENSIONS 5" x 10" x 10" IN-BOX WEIGHT 3.9lbs MIC W/ MOUNT WEIGHT 1lb 9oz DESIGNED & TESTED IN SILICON VALLEY, CA   EACH LA-220 IS LOVINGLY DESIGNED & CRAFTED TO LAST A LIFETIME BY THE LAUTEN AUDIO FAMILY

Lauten Audio LA-320 V2

0 Reviews
75,069.00

SPECIFICATIONS

  • Type: Transformer balanced tube condenser
  • Tube: ECC83
  • Capsule: 32mm center-terminated pressure gradient
  • Polar Patterns: Cardioid
  • Freq. Response: 20Hz-20KHz
  • High Pass: Flat / 120Hz
  • Low Pass: Flat / 12kHz
  • Dynamic Range: 120dB minimum
  • Max. SPL: 0.5%THD@1000Hz: 130dB​
  • Impedance: <200 ohms
  • Self-noise level: < 17dB-A
  • Sensitivity: 14mV/Pa (@ 1kHz 74dB SPL)
  • Connector: 5-pin XLR (PSU to the microphone) and 3-pin XLR (PSU to preamp)
  • Power: Requires included PSU (Switchable 100v to 240v)
  • Box Dimensions: 5” x 12” x 15”
  • Weight: 8.2lbs
  • Mic W/ Shock Weight: 1lb 11oz

Lauten Audio Snare Mic LS-408

0 Reviews
43,263.00

SPECS

Type: End-address pressure gradient FET condenser

Capsule: 32mm

Polar Patterns: Cardioid

Freq. Response: 20Hz-20KHz

High Pass Filter: Flat / 80Hz / 140Hz

Low Pass Filter:  Flat / 5kHz / 12kHz

Dynamic Range: 135dB minimum

SPL Handling: >135DB (0.5%THD@1000Hz)

Impedance: >150 ohms

Self-noise level: < 15dB-A

Signal-to-Noise Ratio:   79dB

Sensitivity: -66.0dBV/Pa (0dB=1V/Pa 1KHz)

Connector: 3-pin XLR

Power: Requires 48v Phantom Power

Dimensions:  109 x 50mm (mic only) 112 x 71mm (with mount) 

Weight: 309g (mic only) 407g (with mount)

Lauten Audio Tom Mic LS-508

0 Reviews
48,651.00

SPECS

Type: Side-address pressure gradient FET condenser 

Capsule: 32mm 

Polar Patterns: Super-Cardioid 

Freq. Response: 20Hz-20KHz 

High Pass Filter: Flat / 80Hz / 140Hz

Low Pass Filter: Flat / 5kHz / 12kHz

Dynamic Range: 135dB minimum 

SPL Handling: &gt;135DB (0.5%THD@1000Hz) 

Impedance: &gt;150 ohms 

Self-noise level: &lt; 15dB-A 

Signal-to-Noise Ratio:   79dB 

Sensitivity: -58.0dBV/Pa (0dB=1V/Pa 1KHz) 

Connector: 3-pin XLR 

Power: Requires 48v Phantom Power 

Dimensions:  127 x 60mm (mic only) 131 x 106mm (with mount)  

Weight: 348g (mic only) 450g (with mount)

Sontronics APOLLO 2

0 Reviews
182,090.00
  • Frequency response: 20Hz - 18kHz
  • Sensitivity: 18mV/Pa -33dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
  • Polar pattern: Figure-of-eight (x2)
  • Impedance: ≤150 Ohms
  • Equivalent noise level: 10dB (A-weighted)
  • Max SPL (for 0.5% THD @ 1kHz): 125dB
  • Power: Phantom power 48V required
  • Connector: 8-pin connector to two 3-pin XLR Neutrik connectors (cable supplied)
  • Dimensions: 260 x 65 x 65mm
  • Weight: 744g (1247g with shockmount)
  • Comes with: stereo to two XLR connector cable, shockmount, aluminium flightcase

Sontronics ARIA

0 Reviews
105,495.00
  • Frequency response: 20Hz - 20kHz
  • Sensitivity: 18mV/Pa -33dB ±1.5dB
  • (0dB = 1V/Pa @ 1,000Hz)
  • Polar pattern: Cardioid
  • Pad: 0, -10dB
  • Filter: Linear, 75Hz
  • Impedance: ≤200 Ohms
  • Equivalent noise level: 18dB
  • (A-weighted)
  • Max SPL (for 0.5% THD @ 1kHz): 125dB
  • Power supply: SPS-2 115/230V
  • *Phantom power NOT required*
  • Connector: 8-pin connector (mic),
  • 3-pin XLR-M (power supply)
  • Dimensions: 230 x 55 x 55mm (mic)
  • Weight: 744g (mic), 1155g (mic with shockmount), 1880g (power supply)
  • Comes with: wooden box (for Aria mic), shockmount, cables, SPS-2 power supply, aluminium flightcase

Sontronics CORONA

0 Reviews
27,105.00
  • Polar pattern: Supercardioid
  • Frequency response: 50Hz - 15kHz
  • Sensitivity: -50dB ±2dB
  • Impedance: ≤600 Ohms
  • Connector: Three-pin XLR
  • Power: Phantom power NOT required
  • Dimensions: 160 x 120 x 60mm
  • Weight: 369g
  • Comes with: hard-shell flightcase

Sontronics DM-1B - Large-Diaphragm Condenser Microphone

0 Reviews
41,235.00
Technical Specifications
  • Microphone type: End-fire condenser for kick drum and bass instruments
  • Polar pattern: Cardioid
  • Frequency response: 20Hz to 20kHz
  • Pad: 0dB, -15dB
  • Sensitivity: (0dB = 1V/Pa @ 1kHz) 6mV/Pa -45dB ±2dB
  • Impedance: ≤200 Ohms
  • Max. SPL: (for 0.5% THD @ 1kHz) 155dB (with -15dB pad switched on)
  • Equivalent noise level: 14dB (A-weighted)
  • Connector: 3-pin XLR
  • Power: Phantom power 48V required
  • Product weight: 0.8 kg
  • Packaged weight: 1.61 kg
  • Product dimensions: 144 x 72 x 72mm
  • Packaged dimensions: 290 x 170 x 105mm

Sontronics DM-1S - Small-Diaphragm Condenser Microphone

0 Reviews
17,015.00
Technical Specifications
  • Microphone type: small-diaphragm condenser for snare and percussion
  • Polar pattern: Cardioid
  • Frequency response: 30Hz to 20kHz
  • Pad: 0dB, -10dB
  • Sensitivity: (0dB = 1V/Pa @ 1kHz) 8mV/Pa -42dB ±2dB
  • Impedance: ≤200 Ohms
  • Max. SPL.: (for 0.5% THD @ 1kHz) 135dB (with -10dB pad switched on)
  • Equivalent noise level: 14dB (A-weighted)
  • Connector: 3-pin XLR
  • Power: Phantom power +48V required
  • Product weight: 0.1 kg
  • Packaged weight: 0.23kg
  • Product dimensions: 91 x 22 x 22mm
  • Packaged dimensions: 140 140 x 70mm

Sontronics DM-1T - Small-Diaphragm Condenser Microphone

0 Reviews
17,015.00
Technical Specifications
  • Microphone type: Small-diaphragm condenser for snare and percussion
  • Polar pattern: Cardioid
  • Frequency response: 30Hz to 20kHz
  • Pad: 0dB, -10dB
  • Sensitivity: (0dB = 1V/Pa @ 1kHz) 8mV/Pa -42dB ±2dB
  • Impedance: ≤200 Ohms
  • Max. SPL.: (for 0.5% THD @ 1kHz) 135dB (with -10dB pad switched on)
  • Equivalent noise level: 14dB (A-weighted)
  • Connector: 3-pin XLR
  • Power: Phantom power +48V required
  • Product weight: 0.1 kg
  • Packaged weight: 0.23 kg
  • Product dimensions: 91 x 22 x 22mm
  • Packaged dimensions: 140 140 x 70mm

Sontronics Drum Pack

0 Reviews
57,565.00
  • Polar pattern (all mics): Cardioid

  • Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)

  • Filter (STC-10 only): Linear/75Hz

  • Freq. response: 20Hz - 20kHz (DM-1B), 30Hz - 20kHz (DM-1S & 1T, STC-10)

  • Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),

  • 8mV/Pa -42dB ±2dB (DM-1S & 1T),

  • 11mV/Pa -39dB ±2dB (STC-10)

  • Impedance (all mics): ≤200 Ohms

  • Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)

  • Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)

  • Power sources (all mics): 48V ±4V phantom power required

  • Connector (all mics): 3-pin XLR

  • Dimensions: 144 x 72 x 72mm (DM-1B),

  • 91 x 22 x 22mm (DM-1S & 1T),

  • 150 x 21 x 21mm (STC-10)

  • Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)

Sontronics Drum Pack Plus

0 Reviews
72,840.00
  • Polar pattern (all mics): Cardioid

  • Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)

  • Filter (STC-10 only): Linear/75Hz

  • Freq. response: 20Hz - 20kHz (DM-1B), 30Hz - 20kHz (DM-1S & 1T, STC-10)

  • Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),

  • 8mV/Pa -42dB ±2dB (DM-1S & 1T),

  • 11mV/Pa -39dB ±2dB (STC-10)

  • Impedance (all mics): ≤200 Ohms

  • Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)

  • Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)

  • Power sources (all mics): 48V ±4V phantom power required

  • Connector (all mics): 3-pin XLR

  • Dimensions: 144 x 72 x 72mm (DM-1B),

  • 91 x 22 x 22mm (DM-1S & 1T),

  • 150 x 21 x 21mm (STC-10)

  • Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)

Sontronics HALO

0 Reviews
19,900.00
  • Polar pattern: Cardioid
  • Frequency response: 50Hz - 15kHz
  • Sensitivity: -53dB ±2dB
  • Impedance: ≤600 Ohms
  • Power: Phantom power NOT required
  • Connector: 3-pin XLR
  • Dimensions: 160 x 120 x 60mm
  • Weight: 340g
  • Comes with: dust bag, padded box
Categories:

Sontronics MERCURY

0 Reviews
163,400.00
  • Polar pattern: Sweepable from omni to figure-of-eight & everything in between
  • Frequency response: 20Hz - 20kHz
  • Pad: 0, -10dB
  • Filter: Linear, 75Hz
  • Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
  • Impedance: ≤200 Ohms
  • Equivalent noise level: <12dB (A-weighted)
  • Max SPL (for 0.5% THD @ 1kHz): 125dB
  • Power: 115/230V *phantom power NOT required*
  • Connector: 8-pin connector (mic),
  • 3-pin XLR-M (power supply)
  • Dimensions: 250 x 90 x 80mm
  • Weight: 2317g (mic only)
  • Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase

Sontronics Mercury Vintage Edition Variable-Pattern Valve Condenser Microphone

0 Reviews
174,345.00
Primary Applications Studio Recording
Form Factor Stand/Boom Mount
Intended Sound Sources Vocals, Speech/Voice Over, Acoustic Guitar, Electric Guitar, Electric Bass, Piano, Drums, Woodwinds, Strings, Choir
Sound Field Mono
Capsule Condenser
Polar Pattern Cardioid, Figure-8, Half-Cardioid, Omnidirectional
Pattern Selection Continuously Variable (Adjustable on Power Supply)
Orientation Side Address
Circuitry Tube (M8162)
Pad -10 dB
High-Pass Filter 75 Hz
Gain Adjustment None
Indicators None
On-Board Controls High-Pass Filter, Pad
Windscreen None
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 125 dB SPL
Impedance 200 Ohms (Phantom Power)
Sensitivity -33 dB at 1 kHz (PSU Power)
Equivalent Noise Level 12 dB A-Weighted
THD 0.5%
Connectivity
Output Connectors (Analog) 1 x Proprietary 8-Pin Male (on Mic) 1 x XLR 3-Pin Male (on Power Supply)
Headphone Connector None
Power
Operating Voltage 115 to 230 V (Power Supply Unit)
AC Input Power (PSU) 115 to 230 VAC, 50 / 60 Hz
Physical
Color Nickel
Mounting Shockmount (Included)
Mounting Thread Size Not Specified by Manufacturer
Included Case Hard Case
Included Filters None
Dimensions H: 9.8 x W: 3.5 x L: 3.1" / H: 250 x W: 90 x L: 80 mm
Weight 3.2 lb / 1471 g (with Mount)
Showing 40 of 63 results
Back to Top
Product has been added to your cart