Universal Audio SC-1 Standard Condenser Microphone
Rated 0 out of 5
0 Reviews| Microphone Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Range | 50 Hz – 16 kHz |
| Sensitivity | -58 dB (1.3 mV) ref 1V at 1 Pa, 1 kHz |
| Output Impedance | 200 Ohms |
| Recommended Load Impedance | > 1 K Ohms |
| Adjustable Controls | Low Cut Filter (200 Hz): Off, On Articulation Boost (3 – 5 kHz): Off, On |
| Connector | 3-Pin XLRM |
| Included Accessory | ⅝” to ⅜” Thread Adapter |
| Dimensions | 7.68" (195 mm) length, 2.36" (60 mm) diameter |
| Weight | 1.6 lbs (735 g) |
Universal Audio SD-1 Standard Dynamic Microphone
Rated 0 out of 5
0 Reviews| Microphone Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Range | 50 Hz – 16 kHz |
| Sensitivity | -58 dB (1.3 mV) ref 1V at 1 Pa, 1 kHz |
| Output Impedance | 200 Ohms |
| Recommended Load Impedance | > 1 K Ohms |
| Adjustable Controls | Low Cut Filter (200 Hz): Off, On Articulation Boost (3 – 5 kHz): Off, On |
| Connector | 3-Pin XLRM |
| Included Accessory | ⅝” to ⅜” Thread Adapter |
| Dimensions | 7.68" (195 mm) length, 2.36" (60 mm) diameter |
| Weight | 1.6 lbs (735 g) |
Universal Audio SP-1 Standard Pencil Microphone (Pair)
Rated 0 out of 5
0 Reviews| Microphone Type | Small Diaphragm Condenser Pair |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz – 20 kHz |
| Sensitivity | -38.0 (12.6 mV) ref 1V at 1 Pa, 1 kHz |
| Output Impedance | 200 Ohms |
| Recommended Load Impedance | Greater than 2K Ohms |
| Output Connector | 3-Pin XLRM |
| Maximum SPL | 142 dB SPL, 1% THD |
| Phantom Power Requirements | 48 VDC |
| Included Accessories | Two Mic Stand Mounts Stereo T-bar Two Foam Windscreens Two ⅝” to ⅜” Thread Adapters |
| Dimensions | 5" (128 mm) length 0.93" (23.5 mm) diameter |
| Weight | .28 lbs (125 g) |
