Sort by

Fluid Audio CX7 Black (single)

0 Reviews
50,385.00
Frequency response: 42 Hz – 27 kHz (+/-3dB) Crossover frequency: 3.5 kHz LF Amplifier power: 90W RMS HF Amplifier power: 50W RMS Signal-to-noise: > 100 dB (typical A-weighted) Polarity: Positive signal at + input produces outward LF one displacement Input impedance: 20 k ohms balanced, 10 k ohms unbalanced Max SPL: 114dB Power: Factory programmed for either 100 – 120V – 60Hz, 220 – 230V – 50Hz Protection: RF interference, output current limiting, over temperature, turn-on/off transient and subsonic filter Cabinet: Painted MDF Size (single monitor): 308 x 219 x 264 mm / 12.12" x 8.62" x 10.5" (HxWxD) Weight (single monitor): 17.8 lbs / 8.1 kg

Focal Alpha Twin Evo (each)

0 Reviews
89,950.00
Type Alpha Twin Evo Monitoring Frequency response (+/- 3dB) 38Hz - 22kHz Maximum SPL 108dB SPL (peak @ 1m) Inputs Connectors TRS: symmetrical 10kOhms XLR: symmetrical 10kOhms RCA: asymmetrical 10kOhms with compensated sensitivity Medium and low frequency amplifier 2 x 50W High frequency amplifier 30W Automatic stand-by mode After around 15 minutes of no use By signal detection >6mV Power supply 100 - 240V~ (T2AL fuse/250V) Connection IEC socket and detachable power cable Sensitivity Adjustable, 0 or +6dB Level midrange/bass (0 - 250Hz) Adjustable, +/-6dB Treble level (4.5 - 35kHz) Adjustable, +/-3dB Power on/off On/off switch on the rear panel Stand-by consumption <0.5W Views and controls On and off LED - Stand-by LED Woofer 2 x 6.5" (16.5cm) Slatefiber cone Tweeter 25mm (1") with aluminium inverted dome Construction 0.6" (15mm) MDF Finish Black vinyl and paint Dimensions with 4 rubber feet (HxWxD) 10.24x21.65x11.41" (260x550x290mm) Weight 26.9lbs (12.2kg)

Focal Shape 40 (each)

0 Reviews
69,285.00
System SHAPE 40
Frequency response (+/-3dB) 60Hz - 35kHz
Maximum SPL (musical signal) 102dB SPL (peak @ 1m)
Electronic section
Inputs/ Impedance
Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 25W, class AB
High frequency amplifier 25W, class AB
Automatic standby
Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supply
Voltages 220-240V (T500mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings
High pass filter Adjustable Full range / 80Hz
Bass(0 - 250Hz) Adjustable, +/-6dB
Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB
Settings
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power Of On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofer 4' (10cm) Flax Cone
Tweeter 1' (25mm) 'M' profile Aluminum-Magnesium
Cabinet
Construction 0.5' (12mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feet (HxWxD) 10.1 x 6.3 x 7.9' (257 x 161 x 200mm)
Weight 16.1lb (5kg)

Focal Shape 50 (each)

0 Reviews
91,310.00
System SHAPE 50
Frequency response (+/-3dB) 50Hz - 35kHz
Maximum SPL (musical signal) 106dB SPL (peak @ 1m)
Electronic section
Inputs/ Impedance
Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 60W, class AB
High frequency amplifier 25W, class AB
Automatic standby
Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supply
Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings
High pass filter Adjustable Full range 45/60/90Hz
Bass(0 - 250Hz) Adjustable, +/-6dB
Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB
SHAPE 50
Wall mount K&M® Fixing kit 24471 + K&M® 24359 adapter
Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter
Table stand / microphone stand K&M® Fixing kit 232
Settings
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power Of On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofer 5' (13cm) Flax Cone
Tweeter 1' (25mm) 'M' profile Aluminum-Magnesium
Cabinet
Construction 0.6' (15mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feet (HxWxD) 12.3 x 7.5 x 9.5' (312 x 191 x 242mm)
Weight 20.7lb (6.5kg)

Focal Shape 65 (each)

0 Reviews
110,035.00
System SHAPE 65
Frequency response (+/-3dB) 40Hz - 35kHz
Maximum SPL (musical signal) 109dB SPL (peak @ 1m)
Electronic section
Inputs/ Impedance
Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 80W, class AB
High frequency amplifier 25W, class AB
Automatic standby
Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supply
Voltages 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings
High pass filter Adjustable Full range 45/60/90Hz
Bass(0 - 250Hz) Adjustable, +/-6dB
Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB
SHAPE 65
Wall mount K&M® Fixing kit 24471 + K&M® 24357 adapter
Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter
Settings
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power Of On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofer 6.5' (16,5cm) Flax Cone
Tweeter 1' (25mm) 'M' profile Aluminum-Magnesium
Cabinet
Construction 0.6' (15mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2' (355 x 218 x 285mm)
Weight 28.2lb (8.5kg)

Focal Shape Twin (each)

0 Reviews
143,075.00
System SHAPE TWIN
 Frequency response (+/- 3dB) 40Hz - 35kHz
Maximum SPL(of musical signals) 110.5dB SPL(peak at @ 1m)
Electronics
Inputs /Impedance
Type
RCA connectors
XLR: balanced 10 kOhms
unbalanced 10 kOhms with sensitivity compensation
Mid-range and low frequency amplifier 2 x 80W, class AB
High frequency amplifier 50W, class AB
Automatic standby
Off
Deactivate standby
Approximately 30 minutes with no signal
Signal detection > 3mV
Power supply
Voltage
Connexion
220-240V (fuse T2AL / 250V) or 100-120V (fuse T3.15AL / 250V)
IEC connector and detachable power cable
Settings
High-pass filter
Bass level(0 - 250Hz)
Midrange/bass(160 Hz, Q=1)
Treble level(4.5 - 35kHz)
Power on/of
Adjustable Full range 45/60/90Hz
Adjustable, +/-6 dB
Adjustable, +/-3 dB
Adjustable, +/-3 dB
On/off switch on rear panel
Power consumption in standby < 0.5W
Displays and controls LED for power on/off and standby
Transducers
Woofers 2 x 5' (13cm) Flax Cone woofers
Tweeter 1' (25mm) 'M'-shaped Aluminum/Magnesium
Cabinet
Construction 0.6' (15mm) MDF
Finish Vinyl, real walnut and black paint
Dimensions including 4 rubber feet (HxLxD)  18.8 x 8.3 x 11' (478 x 211 x 279mm)
Weight 24lbs (11kg)
 Recommended mounting kits
Wall mounting kit K&M® 24471 + K&M® 24359 adapter
Ceiling mounting kit K&M® 24496 + K&M® 24359 adapter

Focal Sub One (each)

0 Reviews
133,445.00
Type Sub One Frequency response (+/-3dB) 32Hz – 120Hz Maximum SPL 114dB SPL (peak @ 1m) Inputs Left, Right, LFE Electronically balanced / 110kOhms 3-point female XLR Variable Outputs (to satellites) Left + Right 3-point male XLR in parallel on inputs Amplification 2 x 100W RMS, D-class Internal signal processing and functions Left + Right mono summation 60Hz or 90Hz high-pass crossover Adjustable low-pass crossover, 24dB/octave Phase adjustment Polarity User controls Subwoofer level adjustment (sensitivity) Low-pass crossover cut-off frequency adjustment Phase adjustment Polarity inverter External mute (controlled by a pedal) Indicators (LED) Power Defeat Power supply Universal detachable IEC inlet power cord Subwoofer 2 x 8" (20cm) long-excursion Focal speaker drivers with “Slatefiber” cone Construction 7/8" (22mm) MDF panel with internal braces Finish Dark grey vinyl Dimensions (HxWxD) 183/4"x113/4"x193/4"(475x310x520mm) Weight 40.8lbs (18.5kg)

Focal Trio6 Be (each)

0 Reviews
343,555.00
Performance Frequency response3-way mode35Hz - 40kHz (+/- 3dB) 2-way mode (Focus)90Hz - 20kHz (+/- 3dB)Maximum SPL3-way mode115dB SPL (peak at 1m) 2-way mode (Focus)105dB SPL (peak at 1m)Electronic section  Inputs
Type / Impedance
Connector
Sensitivity
Electronically balanced / 10 kOhms
XLR
Adjustable, +4dBu or -10dBV
Bass Midrange Treble 200W, class G 150W, class G 100W, class ABPower supply
Main voltage
Wiring
230V (class T fuse 1.6A fuse rating) - 115V (class T fuse 3.5 A fuse rating)
Detachable IEC power cable
Indicators and controls Rear panelInput sensitivity selector (+4dBu/-10dBV) Low frequency shelving (+/- 3dB from 35 to 250Hz) High frequency shelving (+/- 3dB from 4.5 to 40kHz) EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1) FOCUS input / FOCUS output LED Focus mode on, audio clipping and protection indicated by LED on front panelTransducers Subwoofer 8W64701 8' Focal driver with W composite sandwich cone Woofer 5W04701 5' Focal driver with W composite sandwich coneTweeter TB872, 1' Focal pure Beryllium inverted dome tweeterCabinet  Structure 22mm (0.86') reinforced panelsFinish Dark Red natural Burr-ash veneering side panels, Black bodyDimensions including 4 rubber feet (HxWxD) 201/2' x 1015/16' x 143/16' (520 x 278 x 360mm)Weight 44 lbs (20 kg)

Yamaha HS3 (Black) Powered Studio Monitors (Sold in Pair)

0 Reviews
1.00
Speaker type 2-way powered speaker, Bass-reflex type
Frequency response (-10dB) 70 Hz - 22 kHz
Frequency response (-3dB) 85 Hz - 20 kHz
Crossover 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m) 100 dB SPL
Components HF 0.75" Dome
LF 3.5" Cone
Nominal impedance 6 Ω
I/O connectors [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power 26 W + 26 W (Dynamic, RL=6 Ω), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 Ω)
Input sensitivity LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance LINE 1 (COMBO): 20 kΩ, LINE 2 (RCA, ST Mini): 10 kΩ
Controls Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators Power ON (White LED)
Power requirements Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption 15 W
Cabinet material MDF
Dimensions W L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
H L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
D L Side: 189 mm (7.4"), R Side: 177 mm (7.0")
Net weight L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)
Accessories Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging Pair

Yamaha HS3 (White) Powered Studio Monitors (Sold in Pair)

0 Reviews
1.00
Speaker type 2-way powered speaker, Bass-reflex type
Frequency response (-10dB) 70 Hz - 22 kHz
Frequency response (-3dB) 85 Hz - 20 kHz
Crossover 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m) 100 dB SPL
Components HF 0.75" Dome
LF 3.5" Cone
Nominal impedance 6 Ω
I/O connectors [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power 26 W + 26 W (Dynamic, RL=6 Ω), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 Ω)
Input sensitivity LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance LINE 1 (COMBO): 20 kΩ, LINE 2 (RCA, ST Mini): 10 kΩ
Controls Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators Power ON (White LED)
Power requirements Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption 15 W
Cabinet material MDF
Dimensions W L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
H L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
D L Side: 189 mm (7.4"), R Side: 177 mm (7.0")
Net weight L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)
Accessories Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging Pair

Yamaha HS4 Powered Studio Monitor in Black, Pair (HS4 B)

0 Reviews
1.00
  • Packaging: Pair
  • 2-way bass-refiex powered speaker with 4.5" cone woofer and 1" dome tweeter
  • 60 Hz - 22 kHz frequency response (-10 dB)
  • 26 W + 26 W output power
  • Room control and high trim response controls

Yamaha HS5 Black

0 Reviews
1.00
  • 2-Way bass-reflex Bi-Amplified earfield studio monitor with 5" cone woofer and 1" dome tweeter
  • 54Hz - 30Khz Frequency Response; 45W Lf Plus 25W Hf Bi-Amp system for high-performance 70W power amplification
  • Room control and high trim response controls
  • Xlr and Trs phone jack inputs accept balanced or unbalanced signals
  • Is Waterproof: False

Yamaha HS5 W Studio Monitor

0 Reviews
1.00
Speaker type 2-way bi-amp powered studio monitor
Frequency response (-10dB) 54Hz - 30kHz
Frequency response (-3dB) 74Hz - 24kHz
Components LF 5" cone
HF 1" dome
Crossover 2kHz
Output power 70W (LF:45W, HF:25W)
Input sensitivity -10 dBu/10k ohms
I/O connectors XLR3-31 type (balanced), PHONE (balanced)
Indicators Power ON (White LED)
Power consumption 45W
Shape Bass-reflex type
Cabinet material MDF
Dimensions W 170mm (6-11/16")
H 285mm (11-1/4")
D 222mm (8-3/4")
Net weight 5.3kg (11.7 lbs.)
Accessories Owner's Manual, Power cord
Packaging Single
Others LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz)

YAMAHA HS7 White Powered Studio Monitors (Pair)

0 Reviews
1.00

Technical Details

Yamaha HS8 Studio Bluetooth Monitor Subwoofer (Single Unit) 60 Watts , Black

0 Reviews
1.00

Technical Details

Yamaha HS8 W Studio Monitor

0 Reviews
1.00
More Information
HS8 W
Speaker type 2-way bi-amp powered studio monitor
Frequency response (-10dB) 38Hz - 30kHz
Frequency response (-3dB) 47Hz - 24kHz
Components LF 8" cone
HF 1" dome
Crossover 2kHz
Output power 120W (LF:75W, HF:45W)
Input sensitivity -10 dBu/10k ohms
I/O connectors XLR3-31 type (balanced), PHONE (balanced)
Indicators Power ON (White LED)
Power consumption 60W
Shape Bass-reflex type
Cabinet material MDF
Dimensions W 250mm (9-13/16")
H 390mm (15-3/8")
D 334mm (13-1/8")
Net weight 10.2kg (22.5 lbs.)
Accessories Owner's Manual, Power cord
Packaging Single
Others LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz)

Yamaha HS8S Studio Monitor

0 Reviews
1.00
Speaker type Powered subwoofer
Frequency range (-10dB) 22Hz - 160Hz
Components LF 8" cone
Output power 150W
I/O connectors INPUT: XLR3-31 type (balanced) x2, PHONE (balanced) x2 / OUTPUT: XLR3-32 type (balanced) x2 (L&R)
Power consumption 70W
Shape Bass-reflex type
Cabinet material MDF
Dimensions W 300mm (11.8")
H 350mm (13.8")
D 389mm (15.3")
Net weight 12.5kg (27.6 lbs.)
Others LEVEL control, PHASE switch : NORM./REV., HIGH CUT control (80-120Hz, center click), LOW CUT control (80-120Hz, center click), LOW CUT switch (ON/OFF)
Back to Top
Product has been added to your cart