Universal Audio 1176LN Classic Limiting Amplifier
Rated 0 out of 5
0 Reviews| No. of Channels | 1 |
| Controls | Input, Output, Attack, Release, Ratio (Buttons) |
| Threshold | No |
| Ratio | 4:1, 8:1, 12:1, 20:1 |
| Frequency Response | 20Hz-20kHz |
| Sidechain Inserts | No |
| Inputs | 1 x XLR |
| Outputs | 1 x XLR |
| Sidechain I/O | No |
| Rackmount Space | 2U |
| H x W x D | 3.5" x 19" x 12.25" |
| Weight | 5 kg |
Categories: Analog Hardware
Universal Audio 4-710d
Rated 0 out of 5
0 Reviews| Preamp Type | Hybrid |
| No. of Channels | 08 |
| Frequency Response | 20Hz-20kHz |
| Phantom Power | Yes |
| EQ | No |
| Compression | Yes |
| Analog Inputs | 4 x XLR (Mic), 4 x 1/4" (Line), 4 x 1/4" (Hi-Z), 4 x 1/4" (Line - CH 5-8) |
| Analog Outputs | 4 x XLR |
| Digital Inputs | No |
| Digital Outputs | 1 x AES/EBU (DB25), 2 x ADAT (Optical) |
| Other I/O | 1 x Word Clock In (BNC), 1 x Word Clock Out (BNC) |
| Computer Connectivity | No |
| Rackmount Space | 2U |
| H x W x D | 3.5" x 19" x 12" |
| Weight | 5.2 kg |
Universal Audio 6176
Rated 0 out of 5
0 Reviews| Preamp | |
| Microphone Input Impedance | Selectable, 500 Ω(ohms) or 2k |
| Balanced Line Input Impedance | 20k Ω |
| Hi-Z Input Impedance | Selectable between 2.2 M Ω or 47 k Ω |
| Maximum Microphone Input Level | +18 dBu (2k input impedance and 15 dB Pad in) |
| Maximum Output Level | +20 dBm |
| Internal Output Impedance | 80 Ω |
| Recommended Minimum Load | 600 Ω |
| Frequency Response | 20 Hz to 20 kHz +0, -1 dB |
| Maximum Gain | 65 dB (500 Ω input impedance) |
| Signal-to-Noise Ratio | > 90 dB (@ maximum gain) |
| Limiting Amplifier | |
| Input Impedance | Selectable, 15k Ω (ohms) or 600 Ω |
| Output Load | Impedance 600 Ω (floating) |
| Frequency Response | 20 Hz to 20 kHz ± 1 dB |
| Gain | 40 dB, ± 1 dB |
| Distortion | > 0.5% T.H.D. from 50 Hz – 15 kHz with limiting, at 1.1 seconds release setting. Output of +22 dBm with no greater than 0.5% T.H.D. |
| Signal-to-Noise Ratio | > 75 dB |
| Attack Time | Adjustable, from 20 to 800 microseconds |
| Release Time | Adjustable, from 50 milliseconds to 1.1 seconds |
| Stereo Interconnection | Optional, using 1176SA stereo interconnect accessory |
| General | |
| Tube Complement | (1) 12AX7A, (1) 12AT7A |
| Power Requirements | 115V/230V |
| Power Connector | Detachable IEC power cable. |
| Fuse | 400 mA time delay (slow blow) / 115 V200 mA time delay (slow blow) / 230 V |
| Power Indicator Light | 28 V bulb (type 1819) |
| Dimensions 1 | 9' W x 3.5' H x 12.25' D (two rack unit) |
| Weight | 12 lb. |
Universal Audio 710 Twin Finity
Rated 0 out of 5
0 Reviews| Inputs | Microphone (Female XLR),Balanced Line (Female XLR),Unbalanced Instrument (1/4' jack) (D.I.) |
| Outputs | Balanced Line (Male XLR) |
| Tube Complement | 12ax7 |
| Pad | -15dB |
| High Pass Filter | 75Hz |
| Maximum Power Consumption | 160mA @120VAC, 20W |
| Power Requirements | 100-240VAC |
| Dimensions | 8.45W x 3.5H x 10.25D |
| Weight | 5.25 lb |
| Impedance | Mic Input Impedance ,2K ohms Line Input Impedance,10K ohms Hi-Z Input Impedance,2.2M ohms Internal Output Impedance,600 ohms |
| Gain/Levels | Gain Range for Unit,-Infinity to 70dBu,Mic Range Gain Pot,10 ~ 60 dBu,Line Range Gain Pot,-10 ~ 40 dBu,Hi-Z Range Gain Pot,-10 ~ 40 dBu |
| Frequency Response | Mic Frequency Response,20Hz to 100kHz +/- 0.2 dBu,Line Frequency Response,20Hz to 100kHz +/- 0.2 dBu,Hi-Z Frequency Response,20Hz to 100kHz +/- 0.2 dBu |
| Distortion | Min THD+Noise @ +4dBU,0.1% tube 0.005% solid-state |
Universal Audio LA-610
Rated 0 out of 5
0 Reviews
Specifications
- Mic, Line and Hi-Z Input, Line Output
- Dual Impedance Mic and Hi-Z inputs (Mic: 2K, 500Ω, Hi-Z: 2.2M, 47KΩ)
- 5 position Stepped Preamp Input Gain, Continuous Preamp Output Level
- -15dB Pad Switch (15dB Pad/Off)
- Phase reverse (0/180º)
- 48 volt Phantom Power switch (+48v/Off)
- +/- 9 dB stepped High Shelving Filter (4.5, 7, 10 kHz)
- +/- 9 dB stepped Low Shelving Filter (70, 100, 200 Hz)
- T4 Optical Compressor with Continuous Peak Reduction and Makeup Gain
- Compress/Limit/Bypass Modes of Dynamic Operation (3:1 / ∞: 1)
- Meter Source Selector Switch (Preamp/Gain Reduction/Compressor)
- Front Panel Power switch (On/Off)
- Custom Altran and Cinemag Transformers
Universal Audio LA2A
Rated 0 out of 5
0 Reviews| Input Impedance | 50, 150, 250, 600 ohms |
| Output Load Impedance | 50, 150, 250, 600 ohms |
| External Connections | Jones Barrier terminals and XLR connectors |
| Frequency Response | +0/-1 dB 30 Hz to 15kHz |
| Gain | 40 dB ±1dB |
| Input Level | +16 dB maximum |
| Output Level | +10 dB nominal, +16 dB maximum |
| Distortion | Less than 0.5% THD (0.25% typical) at ±10 dBm |
| Noise | 70 dB below +10 dBm output level |
| Attack Time | 10 microseconds |
| Release Time | 0.06 seconds for 50% release; 0.5 to 5 seconds for complete release |
| Meter | dB gain reduction and dB output |
| Power Requirements | 35 watts, 120/240 volts, 50/60 Hz |
| Environmental | |
| Maximum operating temperature 160°F | |
| Dimensions | 19' Rackmount chassis, 3U |
| Weight | 13 lbs. |
Universal Audio Solo 610
Rated 0 out of 5
0 Reviews| Input Impedance | |
| Mic Input | Selectable 450 ohms (Lo-Z) or 1.6 kilohms (Hi-Z) |
| DI Input | Selectable 2.2 megohms (Lo-Z) or 50 kilohms (Hi-Z) |
| Output Load Impedance | 20 Hz to 20 kHz +/- 1 dB |
| Maximum Gain | 61 dB |
| Tube Complement | (1) 12AX7, (1) 12AT7 |
| Maximum Mic Input Level | -12 dBu, 1.0% THD+N Ratio |
| Maximum Instrument Input Level | +4 dBu, 1.0% THD+N Ratio |
| Maximum Gain Mic Input | 55 dB (1.6K ohm input), 60 dB (450 ohm input) |
| Mic/Instrument In Frequency Response | 20 Hz to 20 kHz, +/- 0.1 dB |
| Maximum Gain Instrument Input | 37 dB |
| Dimensions | |
| L | 14' |
| W | 5 3/4' |
| H | 5' |
| Weight | 9 lbs. |